ULTRARM MA20P-S

Heavy-duty extension arm accessory designed to expand single monitor arm setups into dual configurations. Requires the MA20P-S single monitor arm for operation. Features a pneumatic spring system for smooth weight adjustment, built-in cable management, and quick-release VESA plate for easy monitor installation. Supports ultrawide monitors up to 57 inches and includes both 75x75mm and 100x100mm VESA compatibility.

Offers full articulation with ±25 degrees tilt, 180 degrees swivel, 180 degrees rotation, and 13 inches of height adjustment. Can stack up to two 49-inch ultrawide monitors vertically. Note that the mounting base and pole are not included and must be purchased separately.

Single monitor arm desk mount supporting screens up to 32 inches and weighing 4.4-17.6 lbs. Features full motion positioning with tilt, swivel, and 360-degree rotation capabilities. Compatible with 75×75mm and 100×100mm VESA patterns. Includes both C-clamp and grommet mounting options for desks 0.39-4.53 inches thick, with setup completed in approximately 15 minutes.

Built from heavy-duty steel with adjustable tension system tested through over 20,000 cycles. Provides up to 19.6 inches of extension and 16.5 inches of height adjustment. Integrated cable management channels and snap-on covers help organize cables and reduce desk clutter. Backed by a 10-year manufacturer support warranty.

Full motion wall mount designed for flat panel TVs and displays ranging from 26 to 55 inches. Supports weight capacity up to 80 lbs with VESA compatibility from 3.9x3.9 through 15.7x15.7. Installation compatible with concrete, brick, and wood studs using single stud mounting hardware. Package includes bubble level, mounting template, and user manual.

Offers extensive articulation with 180-degree swivel rotation and arm extension ranging from 2.6 to 16.3 inches for flexible viewing angles. Tilt adjustment provides 10 degrees upward to 5 degrees downward positioning. Engineered for secure wall mounting with professional-grade construction suitable for residential and light commercial applications.

The monTEK MA1006PXLBK-D is a heavy-duty dual monitor stand designed to support two displays ranging from 17 to 32 inches. Built with reinforced steel joints and thickened VESA plates, it provides stable support with a weight capacity of 22 lbs per arm. The stand features anti-slip base pads to minimize wobble and is compatible with VESA 75×75mm and 100×100mm mounting patterns for broad device compatibility.

This articulating monitor arm offers full adjustability with tilt, swivel, and rotation on each monitor head, allowing you to switch between landscape and portrait orientations. The extendable arms can be positioned side by side or stacked for multitasking workflows. Installation is flexible with both C-clamp and grommet base options included, making it suitable for home offices, gaming setups, dorm rooms, and shared workspaces.

Single monitor arm designed for ultrawide displays up to 49 inches and 44 lbs. Features a spring-assist tension arm that counterbalances monitor weight for ergonomic height adjustments. Supports both 75x75mm and 100x100mm VESA patterns. Mounts via heavy-duty C-clamp to desks up to 3.2 inches thick, with optional grommet mount for 1.4-inch desks.

Offers extensive articulation including 11 inches of height adjustment, 180-degree swivel, 360-degree rotation, and tilt range from +50 to -20 degrees. Integrated cable management covers keep cords organized during repositioning. Detachable VESA plate simplifies installation. Designed for gaming and professional setups requiring frequent monitor adjustments.

This triple monitor mount accommodates screens up to 32 inches with VESA 75x75mm or 100x100mm mounting patterns. It supports monitors weighing between 4.4 and 17.6 lbs each. The mount lifts all three displays off your desk surface, freeing up valuable workspace and creating a more organized work environment.

The mount offers full adjustability with swivel, tilt, and rotation capabilities, allowing you to customize viewing angles for comfort and productivity. It features dual installation options: a C-clamp mount for desks 0.39-3.15 inches thick or a grommet mount for desks 0.39-2.36 inches thick. Both mounting methods provide secure, stable support for extended use.

This dual monitor mount accommodates screens from 17 to 49 inches with VESA patterns of 75x75mm or 100x100mm. The heavy-duty aluminum and steel construction supports up to 33 lbs per monitor. Installation is flexible with both C-clamp and grommet mounting options available, plus quick-release VESA plates for easy setup.

The mount offers extensive adjustability with height reaching up to 19.8 inches and arm extension to 21.14 inches. Full articulation includes tilt from -55° to +55°, ±90° swivel, and ±90° screen rotation. An integrated cable management system keeps wires organized while freeing up valuable desk space.

This quad monitor mount accommodates one ultrawide display up to 49 inches on the top bracket and three standard monitors up to 27 inches on lower brackets. The mount supports up to 44 lbs on the top bracket and 22 lbs per lower bracket, with VESA compatibility at 75x75mm or 100x100mm. Steel construction ensures durability and stability through extensive fatigue testing.

The mount offers flexible adjustment options with the top bracket featuring ±20° tilt and 180° swivel, while side brackets provide ±45° tilt and 180° swivel. All brackets include full 360° rotation capability. Height adjustable along the center pole, it works with both C-clamp and grommet mounting options for various desk configurations. Built-in cable management keeps your workspace organized.

Single monitor arm featuring a mechanical spring mechanism designed to eliminate gas loss and sagging. Supports displays up to 32 inches with VESA 75/100mm compatibility. The slimmer design reduces desk space requirements and wall obstruction. Installation is straightforward using either C-clamp or grommet base mounting options.

Offers extensive positioning flexibility with 360-degree rotation, -25 to 90-degree tilt range, and 230mm height adjustment. The upgraded joint construction provides enhanced stability and security. Ideal for ergonomic workspace setup to reduce neck strain by positioning monitors at natural eye level.

The HUANUO HNSS6 is a single monitor arm designed for screens between 13 and 32 inches, supporting monitors weighing 4.4 to 19.8 lbs. It features both C-clamp and grommet mounting options for flexible desk installation. The arm offers comprehensive adjustability with tilt, swivel, and rotation capabilities.

Built with automotive-grade components, this monitor stand has undergone 20,000 motion tests to ensure durability and stability. Installation takes approximately 3 minutes with a simple one-piece design. The arm lifts screens up to 39.6cm from the desktop and maintains stability at any angle without requiring constant readjustment.

The WALI GSDM003 is a triple monitor mount designed to accommodate screens up to 32 inches with VESA compatibility of 75x75mm or 100x100mm. It supports up to 15.4 lbs per monitor and features a robust construction with high-grade materials for stable desk mounting.

This mount offers extensive adjustability with tilt range of +35°/-35°, swivel of +90°/-90°, and full 360° rotation capability. It includes both clamp and grommet base options, reaching maximum heights of 17.1 inches and extensions up to 27.2 inches for flexible workspace configurations.