MOUNT PRO Single Long Monitor Arm

Single monitor desk mount designed for screens 13 to 32 inches with a maximum weight capacity of 22 lbs. Compatible with VESA 75x75mm and 100x100mm patterns. Features dual mounting options: desk clamp for surfaces 0.39 to 2.76 inches thick or grommet base for similar thickness ranges. The aluminum arm includes a counterbalance system tested through 20,000 motion cycles for durability and stability.

Offers extensive adjustability with 360-degree rotation for landscape or portrait orientation, plus or minus 90-degree swivel, and plus 85 to minus 45-degree tilt. The arm extends up to 19.7 inches horizontally and adjusts up to 17.3 inches vertically. Includes built-in cable management and quick-release VESA plate. Assembly takes approximately 10 minutes with labeled parts and clear instructions provided.

The MOUNT PRO PR7001 is a single monitor wall mount designed for screens between 13 and 32 inches. It supports VESA patterns of 75x75mm and 100x100mm, with a weight capacity of up to 19.8 lbs. The mount features a gas spring system that allows for effortless height adjustment and creates a suspended free-float effect when properly calibrated to your monitor's weight.

This full-motion arm offers comprehensive adjustability including ±90° tilt, 180° swivel, and 360° rotation capabilities. The arm extends up to 21.6 inches from the wall and includes integrated cable management to keep cords organized and out of sight. It installs on both wood stud and concrete walls and comes with clear instructions for quick assembly.

This 2-in-1 mount accommodates both laptops up to 17 inches and monitors up to 32 inches with VESA 75x75mm and 100x100mm compatibility. The removable laptop tray features adjustable side clamps and ventilation slots for heat dissipation. Supports devices weighing 4.4 to 22 lbs with a gas spring arm that extends up to 20.9 inches forward and 23.6 inches in height.

Full motion adjustment includes 180-degree swivel, 360-degree rotation, and tilt from +70 to -45 degrees. Installation options include C-clamp for desks 0.39-2.76 inches thick or grommet mount for 0.39-1.97 inch desks. Built-in cable management system helps organize workspace while freeing up desk surface area.

Dual monitor stand designed for vertical stacking of two screens up to 27 inches each, with support for sizes 13-32 inches. Features an extended 16.5-inch column that raises monitors to a maximum height of 26.6 inches from desktop, ideal for elevated viewing positions and taller users. Each arm supports 4.4-22 lbs with VESA 75/100mm compatibility.

Offers full-motion adjustability including ±90° swivel, +70°/-45° tilt, and 360° rotation for landscape or portrait orientation. Dual pneumatic springs enable smooth height adjustments. Available in clamp mount (0.39-2.76" desk thickness) or grommet mount (0.39-1.97" thickness). Built-in cable management and tested for 20,000 motion cycles ensures durability.

The MOUNTUP Freelift is a dual monitor arm designed to support two displays up to 32 inches each, with a weight capacity of 4.4 to 22 lbs per monitor. It features full motion articulation including tilt, swivel, and 360-degree rotation from landscape to portrait orientation. The arm extends up to 19.3 inches and rises 17.3 inches in height, allowing customization for various desk setups and sitting or standing positions.

Installation is flexible with both C-clamp and grommet base options, accommodating desks with thicknesses between 0.39 and 2.76 inches. The mount includes integrated cable management to reduce desktop clutter. Universal VESA compatibility (75x75mm and 100x100mm) works with major monitor brands including ASUS, Acer, Samsung, LG, HP, and Dell.

The ErGear EGDMA69B is a single monitor arm designed for displays between 13 and 34 inches, supporting up to 19.8 lbs with VESA patterns of 75x75mm or 100x100mm. The arm features a reinforced VESA head and has been tested through over 20,000 cycles for durability and smooth operation. Tool-free VESA mounting enables quick three-step installation without additional tools.

This full-motion arm offers extensive adjustability with 17.5 inches of height adjustment and 18.1 inches of reach. It includes +80°/-50° tilt, ±90° swivel, and 360° rotation capabilities to achieve optimal viewing angles. The integrated cable management clips require no tools to operate, helping maintain a clean workspace while lifting your monitor to free up desk space. Compatible with C-clamp or grommet mounting options.

Single monitor arm designed for screens between 13 and 32 inches with a weight capacity of 4.4 to 19.8 lbs. Features an automotive-grade gas spring mechanism that has undergone 20,000 motion tests for durability. Compatible with VESA patterns 75x75mm and 100x100mm. Can be installed in approximately 3 minutes with included hardware.

Offers extensive adjustability with tilt range from -50° to +30°, ±90° swivel, and 360° rotation capability. Lifts monitors up to 39.6cm from the desktop with one-handed operation. Available with either C-clamp or grommet base mounting options to maximize desk space utilization compared to traditional monitor stands.

The NB SmooVex A5 is a single monitor arm featuring a mechanical spring system designed for stability without gas loss or sagging. It supports monitors up to 32 inches and uses VESA 75/100mm mounting standards. The arm offers comprehensive adjustability with 360-degree rotation, tilt range from -25 to 90 degrees, and 230mm of height travel to position your display at the ideal viewing angle.

Installation is straightforward with either C-clamp or grommet base mounting options, requiring no complex assembly. The slimmer design minimizes desk space obstruction while maintaining a secure build. This ergonomic monitor arm is ideal for reducing neck strain and improving posture during extended work or gaming sessions.

The monTEK quad monitor stand mount accommodates four displays between 17 and 32 inches, each supporting up to 22 lbs. It features both C-clamp and grommet base mounting options for flexible desk installation. The mount includes integrated cable organizers to maintain a clean workspace and quick-release VESA plates for simplified monitor attachment.

Designed for ergonomic viewing, this quad arm offers comprehensive adjustability with tilt, swivel, and full rotation capabilities to minimize neck and eye strain. Built with high-grade materials and an advanced joint design, it maintains stability and keeps displays level throughout the full range of motion.

The HUANUO HNSS6 is a single monitor arm designed for screens between 13 and 32 inches, supporting monitors weighing 4.4 to 19.8 lbs. It features both C-clamp and grommet mounting options for flexible desk installation. The arm offers comprehensive adjustability with tilt, swivel, and rotation capabilities.

Built with automotive-grade components, this monitor stand has undergone 20,000 motion tests to ensure durability and stability. Installation takes approximately 3 minutes with a simple one-piece design. The arm lifts screens up to 39.6cm from the desktop and maintains stability at any angle without requiring constant readjustment.

The Acer AMS001 is a single monitor arm designed for screens between 17 and 34 inches, supporting monitors weighing 4.4 to 19.8 pounds. It features a gas spring mechanism with automotive-grade pneumatic cores that have passed 20,000 motion tests, providing 80% more stability than standard arms. The arm accommodates both VESA 75×75mm and 100×100mm mounting standards.

This monitor arm offers extensive adjustability with tilt ranging from -60° to +90°, swivel of ±90°, and 360° rotation capability. It can raise monitors up to 18.1 inches from the desk with one-hand adjustment. The mount includes flexible installation options with both C-clamp and grommet bases, compatible with desks 15-80mm thick. Installation takes approximately 5 minutes with included hardware.

Triple monitor mount designed to support one ultrawide display up to 49 inches on the top bracket and two standard monitors up to 34 inches each on the lower side brackets. Features a steel construction with desk clamp and grommet mounting options for desks 0.39 to 1.77 inches thick. Supports VESA 75x75mm and 100x100mm mounting patterns with a combined weight capacity of 110 lbs.

Offers independent adjustment for each monitor with the center display providing tilt and swivel, while side arms include tilt, swivel, and rotation capabilities. The mount includes cable management features and all necessary installation hardware. Engineered for durability with over 20,000 fatigue tests, backed by US-based customer support.

The ErGear EGDMA72B is a vertical dual monitor stand designed for stacked monitor configurations. It supports screens from 13 to 33 inches with VESA 75x75mm and 100x100mm mounting patterns. Each arm holds up to 19.8 lbs, providing a compact solution for multi-monitor setups that optimizes desk space while maintaining stability.

This dual monitor mount features independent arm adjustability with height adjustments up to 25 inches and extension reach of 20.6 inches per arm. Monitor positioning includes tilt from +80° to -50°, ±90° swivel, and 360° rotation for portrait or landscape modes. The integrated C-clamp with anti-slip padding and tool-free installation makes setup straightforward, while integrated cable management clips keep cables organized.

The WALI GSDM003 is a triple monitor mount designed to accommodate screens up to 32 inches with VESA compatibility of 75x75mm or 100x100mm. It supports up to 15.4 lbs per monitor and features a robust construction with high-grade materials for stable desk mounting.

This mount offers extensive adjustability with tilt range of +35°/-35°, swivel of +90°/-90°, and full 360° rotation capability. It includes both clamp and grommet base options, reaching maximum heights of 17.1 inches and extensions up to 27.2 inches for flexible workspace configurations.