ErgoFocus EF3661B

The ErgoFocus Dual Monitor Arm is a full-motion mount designed to hold two monitors simultaneously on a single articulating arm system. It supports screens from 13 to 32 inches with a weight capacity of 4.4 to 19.8 lbs per monitor. The mount is compatible with VESA 75x75mm and 100x100mm standards, making it suitable for most modern displays.

This desk mount features extensive adjustment capabilities including ±90° tilt, 180° swivel, and 360° rotation for optimal ergonomic positioning. Installation is quick and straightforward using either the included C-clamp or grommet mount kit, allowing setup in approximately 10 minutes. The gas spring mechanism enables smooth, effortless repositioning while freeing up valuable desktop space.

The ErgoFocus Triple Monitor Arm is designed to mount three displays simultaneously on a single desk setup. It supports screens from 13 to 32 inches and accommodates both 75x75mm and 100x100mm VESA patterns. Each arm holds up to 19.8 lbs, providing stable support for most flat and curved monitors. The mount features 360-degree rotation, 180-degree swivel, and 90-degree tilt adjustment for optimal viewing angles.

This triple monitor mount includes two installation options: a C-clamp for tables 0.39 to 3.15 inches thick and a grommet base for desks 0.39 to 1.97 inches thick. Integrated cable management keeps wiring organized and hidden. The adjustable design allows arms to extend, retract, and adjust height dynamically to maximize desk space and improve ergonomic positioning.

Single monitor arm designed for desks up to 2.76 inches thick, featuring an extended arm that reaches 27.76 inches for deeper workstations. Supports monitors from 13 to 32 inches weighing 4.4 to 19.8 lbs with VESA 75x75mm and 100x100mm mounting. Includes integrated cable management and choice of clamp or grommet mounting options.

Offers extensive adjustability with 90-degree swivel, 85 to 45-degree tilt range, and 360-degree rotation for landscape or portrait orientation. The taller pole provides up to 28.5 inches of height adjustment above the desktop. Tested to withstand 20,000 motion cycles for durability and long-term stability during daily use and repositioning.

Full motion wall mount designed for flat panel TVs and displays ranging from 26 to 55 inches. Supports weight capacity up to 80 lbs with VESA compatibility from 3.9x3.9 through 15.7x15.7. Installation compatible with concrete, brick, and wood studs using single stud mounting hardware. Package includes bubble level, mounting template, and user manual.

Offers extensive articulation with 180-degree swivel rotation and arm extension ranging from 2.6 to 16.3 inches for flexible viewing angles. Tilt adjustment provides 10 degrees upward to 5 degrees downward positioning. Engineered for secure wall mounting with professional-grade construction suitable for residential and light commercial applications.

This quad monitor mount accommodates one ultrawide display up to 49 inches on the top bracket and three standard monitors up to 27 inches on lower brackets. The mount supports up to 44 lbs on the top bracket and 22 lbs per lower bracket, with VESA compatibility at 75x75mm or 100x100mm. Steel construction ensures durability and stability through extensive fatigue testing.

The mount offers flexible adjustment options with the top bracket featuring ±20° tilt and 180° swivel, while side brackets provide ±45° tilt and 180° swivel. All brackets include full 360° rotation capability. Height adjustable along the center pole, it works with both C-clamp and grommet mounting options for various desk configurations. Built-in cable management keeps your workspace organized.

The ErGear EGDMA69B is a single monitor arm designed for displays between 13 and 34 inches, supporting up to 19.8 lbs with VESA patterns of 75x75mm or 100x100mm. The arm features a reinforced VESA head and has been tested through over 20,000 cycles for durability and smooth operation. Tool-free VESA mounting enables quick three-step installation without additional tools.

This full-motion arm offers extensive adjustability with 17.5 inches of height adjustment and 18.1 inches of reach. It includes +80°/-50° tilt, ±90° swivel, and 360° rotation capabilities to achieve optimal viewing angles. The integrated cable management clips require no tools to operate, helping maintain a clean workspace while lifting your monitor to free up desk space. Compatible with C-clamp or grommet mounting options.

The monTEK MA1006PXLBK-D is a heavy-duty dual monitor stand designed to support two displays ranging from 17 to 32 inches. Built with reinforced steel joints and thickened VESA plates, it provides stable support with a weight capacity of 22 lbs per arm. The stand features anti-slip base pads to minimize wobble and is compatible with VESA 75×75mm and 100×100mm mounting patterns for broad device compatibility.

This articulating monitor arm offers full adjustability with tilt, swivel, and rotation on each monitor head, allowing you to switch between landscape and portrait orientations. The extendable arms can be positioned side by side or stacked for multitasking workflows. Installation is flexible with both C-clamp and grommet base options included, making it suitable for home offices, gaming setups, dorm rooms, and shared workspaces.

The ErGear EGDMA72B is a vertical dual monitor stand designed for stacked monitor configurations. It supports screens from 13 to 33 inches with VESA 75x75mm and 100x100mm mounting patterns. Each arm holds up to 19.8 lbs, providing a compact solution for multi-monitor setups that optimizes desk space while maintaining stability.

This dual monitor mount features independent arm adjustability with height adjustments up to 25 inches and extension reach of 20.6 inches per arm. Monitor positioning includes tilt from +80° to -50°, ±90° swivel, and 360° rotation for portrait or landscape modes. The integrated C-clamp with anti-slip padding and tool-free installation makes setup straightforward, while integrated cable management clips keep cables organized.

The WALI GSMP001N is a single monitor arm designed to accommodate displays from 13 to 34 inches, with a maximum weight capacity of 26.4 lbs for flat screens and 19.8 lbs for curved screens. It features VESA 75/100mm mounting compatibility and comes with two installation options: C-clamp or grommet base mounting for desks between 0.39 and 2.76 inches thick.

This monitor arm offers extensive adjustability for ergonomic viewing, including 180-degree swivel, 70-degree tilt up and 45-degree tilt down, and full 360-degree rotation. The arm extends up to 19.3 inches horizontally and raises up to 17.3 inches vertically, allowing users to position their display for optimal comfort and reduced strain during extended use.

The MOUNTUP MU0005 is a dual monitor stand designed for displays between 17 and 32 inches, supporting weights from 4.4 to 17.6 lbs per monitor. It accommodates VESA patterns of 75x75mm and 100x100mm, making it compatible with most standard monitors. The mount features both C-clamp and grommet base options for flexible desk installation, fitting desktops of varying thicknesses.

This dual monitor arm offers full motion positioning with 135° tilt, 180° swivel, and 360° rotation capabilities for each monitor independently. The pneumatic arm system provides smooth adjustments with 17.3 inches of extension and 9.4 inches of height adjustment. Built-in cable management conceals wires within the arms, freeing up valuable desk space while maintaining a professional appearance.

The HUANUO HNSS6 is a single monitor arm designed for screens between 13 and 32 inches, supporting monitors weighing 4.4 to 19.8 lbs. It features both C-clamp and grommet mounting options for flexible desk installation. The arm offers comprehensive adjustability with tilt, swivel, and rotation capabilities.

Built with automotive-grade components, this monitor stand has undergone 20,000 motion tests to ensure durability and stability. Installation takes approximately 3 minutes with a simple one-piece design. The arm lifts screens up to 39.6cm from the desktop and maintains stability at any angle without requiring constant readjustment.

The monTEK quad monitor stand mount accommodates four displays between 17 and 32 inches, each supporting up to 22 lbs. It features both C-clamp and grommet base mounting options for flexible desk installation. The mount includes integrated cable organizers to maintain a clean workspace and quick-release VESA plates for simplified monitor attachment.

Designed for ergonomic viewing, this quad arm offers comprehensive adjustability with tilt, swivel, and full rotation capabilities to minimize neck and eye strain. Built with high-grade materials and an advanced joint design, it maintains stability and keeps displays level throughout the full range of motion.

This triple monitor mount accommodates screens up to 32 inches with VESA 75x75mm or 100x100mm mounting patterns. It supports monitors weighing between 4.4 and 17.6 lbs each. The mount lifts all three displays off your desk surface, freeing up valuable workspace and creating a more organized work environment.

The mount offers full adjustability with swivel, tilt, and rotation capabilities, allowing you to customize viewing angles for comfort and productivity. It features dual installation options: a C-clamp mount for desks 0.39-3.15 inches thick or a grommet mount for desks 0.39-2.36 inches thick. Both mounting methods provide secure, stable support for extended use.