5Rcom Dual Monitor Arm

The WALI GSMP001N is a single monitor arm designed to accommodate displays from 13 to 34 inches, with a maximum weight capacity of 26.4 lbs for flat screens and 19.8 lbs for curved screens. It features VESA 75/100mm mounting compatibility and comes with two installation options: C-clamp or grommet base mounting for desks between 0.39 and 2.76 inches thick.

This monitor arm offers extensive adjustability for ergonomic viewing, including 180-degree swivel, 70-degree tilt up and 45-degree tilt down, and full 360-degree rotation. The arm extends up to 19.3 inches horizontally and raises up to 17.3 inches vertically, allowing users to position their display for optimal comfort and reduced strain during extended use.

The WALI GSDM003 is a triple monitor mount designed to accommodate screens up to 32 inches with VESA compatibility of 75x75mm or 100x100mm. It supports up to 15.4 lbs per monitor and features a robust construction with high-grade materials for stable desk mounting.

This mount offers extensive adjustability with tilt range of +35°/-35°, swivel of +90°/-90°, and full 360° rotation capability. It includes both clamp and grommet base options, reaching maximum heights of 17.1 inches and extensions up to 27.2 inches for flexible workspace configurations.

The ErGear EGDMA72B is a vertical dual monitor stand designed for stacked monitor configurations. It supports screens from 13 to 33 inches with VESA 75x75mm and 100x100mm mounting patterns. Each arm holds up to 19.8 lbs, providing a compact solution for multi-monitor setups that optimizes desk space while maintaining stability.

This dual monitor mount features independent arm adjustability with height adjustments up to 25 inches and extension reach of 20.6 inches per arm. Monitor positioning includes tilt from +80° to -50°, ±90° swivel, and 360° rotation for portrait or landscape modes. The integrated C-clamp with anti-slip padding and tool-free installation makes setup straightforward, while integrated cable management clips keep cables organized.

The monTEK MA1006PXLBK-D is a heavy-duty dual monitor stand designed to support two displays ranging from 17 to 32 inches. Built with reinforced steel joints and thickened VESA plates, it provides stable support with a weight capacity of 22 lbs per arm. The stand features anti-slip base pads to minimize wobble and is compatible with VESA 75×75mm and 100×100mm mounting patterns for broad device compatibility.

This articulating monitor arm offers full adjustability with tilt, swivel, and rotation on each monitor head, allowing you to switch between landscape and portrait orientations. The extendable arms can be positioned side by side or stacked for multitasking workflows. Installation is flexible with both C-clamp and grommet base options included, making it suitable for home offices, gaming setups, dorm rooms, and shared workspaces.

The WALI GSDM004S is a quad monitor mount designed to support four displays ranging from 13 to 27 inches. It accommodates VESA 75/100mm mounting patterns and can hold up to 19.8 lbs per monitor. The mount features a tall center pole design with a maximum height of 32.2 inches, allowing for flexible vertical positioning of multiple screens.

This mount offers extensive adjustment capabilities with the top bracket providing ±20° tilt and 180° swivel, while side brackets feature ±35° tilt and 180° swivel. All brackets include full 360° rotation for optimal viewing angles. The steel construction ensures durability and stability, backed by over 20,000 fatigue tests. Installation is straightforward with both C-clamp and grommet mounting options, plus integrated cable management.

The Acer AMS001 is a single monitor arm designed for screens between 17 and 34 inches, supporting monitors weighing 4.4 to 19.8 pounds. It features a gas spring mechanism with automotive-grade pneumatic cores that have passed 20,000 motion tests, providing 80% more stability than standard arms. The arm accommodates both VESA 75×75mm and 100×100mm mounting standards.

This monitor arm offers extensive adjustability with tilt ranging from -60° to +90°, swivel of ±90°, and 360° rotation capability. It can raise monitors up to 18.1 inches from the desk with one-hand adjustment. The mount includes flexible installation options with both C-clamp and grommet bases, compatible with desks 15-80mm thick. Installation takes approximately 5 minutes with included hardware.

Single monitor arm featuring a mechanical spring mechanism designed to eliminate gas loss and sagging. Supports displays up to 32 inches with VESA 75/100mm compatibility. The slimmer design reduces desk space requirements and wall obstruction. Installation is straightforward using either C-clamp or grommet base mounting options.

Offers extensive positioning flexibility with 360-degree rotation, -25 to 90-degree tilt range, and 230mm height adjustment. The upgraded joint construction provides enhanced stability and security. Ideal for ergonomic workspace setup to reduce neck strain by positioning monitors at natural eye level.

Single monitor arm designed for screens between 13-32 inches with a weight capacity of 19.8 lbs. Features an extended reach of up to 27.9 inches, making it ideal for deep desks or corner setups. Supports VESA 75x75mm and 100x100mm mounting patterns. Tested to withstand 20,000 cycles of motion for durability.

Offers comprehensive adjustability with ±45° tilt, ±180° swivel, and ±180° rotation for ergonomic positioning on both sitting and standing desks. Includes dual mounting options: C-clamp (fits desk thickness 0.39-3.15 inches) or grommet mount (fits desk thickness 0.39-1.57 inches). Integrated cable management keeps workspace organized.

Single monitor arm designed for screens between 13 and 32 inches with a weight capacity of 4.4 to 19.8 lbs. Features an automotive-grade gas spring mechanism that has undergone 20,000 motion tests for durability. Compatible with VESA patterns 75x75mm and 100x100mm. Can be installed in approximately 3 minutes with included hardware.

Offers extensive adjustability with tilt range from -50° to +30°, ±90° swivel, and 360° rotation capability. Lifts monitors up to 39.6cm from the desktop with one-handed operation. Available with either C-clamp or grommet base mounting options to maximize desk space utilization compared to traditional monitor stands.

Single monitor arm desk mount supporting screens up to 32 inches and weighing 4.4-17.6 lbs. Features full motion positioning with tilt, swivel, and 360-degree rotation capabilities. Compatible with 75×75mm and 100×100mm VESA patterns. Includes both C-clamp and grommet mounting options for desks 0.39-4.53 inches thick, with setup completed in approximately 15 minutes.

Built from heavy-duty steel with adjustable tension system tested through over 20,000 cycles. Provides up to 19.6 inches of extension and 16.5 inches of height adjustment. Integrated cable management channels and snap-on covers help organize cables and reduce desk clutter. Backed by a 10-year manufacturer support warranty.